DRAGONS BLOOD STEP 1

When applying Dragons Blood Step 1 and 2 (PMB-8056 and PPB-8057) is a primer necessary or am I able to go straight over sand-blasted aluminum and is a clear coat recommended?

Dragons Blood Step 1 PMB 8056 combined with step 2 PPB 8057 does not require a primer or a clear coat. Step 1 is a metallic base and Step 2 is a metallic clear to achieve the look found on our website and swatch sample. If you were to apply step one only then I would recommend adding a clear coat like Clear Vision PPS-2974 to protect the metallic flakes from Oxidizing. I do not have a sample of Step 1 only available but custom spray-outs can be ordered. Here are the details for ordering a custom spray out:

If you would like a custom spray-out of any combination, we can provide that for a fee of $9.95 each plus shipping. This would be a custom panel with two coats of your choice. For a custom panel with three coats (base, mid and top coat), the fee is $14.95.   The custom panels measure 3” x 5” and can take approximately 2 - 4 days to complete. Any order for such panels would need to be called in as they are not available online at this time.

Thanks for the inquiry

First time using this color, going with step 1 and 2. Do I flash step one and then do the full cure with step 2? Or do I fully cure step 1 before moving to step 2? Any tips would be appreciated.

You will flash coat the first step and full cure the 2nd step.