FLAMING GOLD
Item: PPB-4698
In Stock (Ships in 1-2 Business Days)
We are temporarily out of this product.
Description:
Flaming Gold is a transparent bright yellow-gold with specs of gold metallic. This color is a polyester top coat powder coat with a high gloss finish.
Top Coat Information: Top coats are transparent. The color and brightness of the substrate (surface) under a top coat will affect the finished appearance. To achieve results similar to the S panel image, the top coat must be applied over a bright silver substrate. Super Chrome Plus UMS-10671 can be used as a base coat to simulate the appearance of a chrome-like substrate when one is not present. As always, shoot a test piece first to determine if your desired results will be achieved.
High Gloss: 85+ Gloss Units
WARNING: This product may expose you to chemicals known to the State of California to cause cancer. For more information, see the product's safety data sheet.
Product Support
Have questions about this product?
Ask A QuestionQuestion:
Flaming Gold PPB-4698 does not seem to be an easy color to apply over Alien silver PMS-2569. My part has a lot of faraday areas and I'm getting a lot of grey spots that make even coverage very hard to achieve.
05/08/20 10:50 am
Answer:
Flaming Gold PPB-4698 is a top coat that can be applied in stages over difficult substrates with lots of faraday areas. Applying over a silver base is good practice and depending on which silver is used certain flow-out times can help yield a better base for your Flaming Gold application. Allowing the silver base like Alien Silver PMS-2569 to cure for approx 5 minutes beyond flow-out stage will help secure a reflective silver base for when it comes time to cure the Flaming Gold. Top coats can be a little tricky. Here is a link to an article that helps achieve a consistent top coat application. Remember that the flow-out stage of a powder is a good opportunity to inspect and add more powder if necessary.
https://www.prismaticpowders.com/learn/45/why-is-the-powder-coating-color-or-finish-inconsistent
Knowledge Base FAQ
Congratulations, your account has been created.
Added To Cart
Some powders may require either a base coat or a top coat or have other
special instructions. Please read each product description carefully to
ensure you are ordering what you need.
Amount: $0 /ea
Quantity: 1