ROCKSTAR SPARKLE
Item: PPB-5835
In Stock (Ships in 1-2 Business Days)
We are temporarily out of this product.
Description:
Rockstar Sparkle is a clear coat with large metallic flake that shimmers, reflecting silver and gold. This color is a polyester top coat powder coat and has a high gloss finish.
Two Coat Information: To achieve this color as shown, High Gloss Black PSS-11248 must be applied as a base coat.
Our clear top coats are designed to enhance the appearance of each base coat. However, on some occasions the clear top coat will also change the appearance of the color it is being applied over. We recommend that you spray a test panel to ensure the final color before applying it to your project.
High Gloss: 85+ Gloss Units
WARNING: This product may expose you to chemicals known to the State of California to cause cancer. For more information, see the product's safety data sheet.
Related Products
Product Support
Have questions about this product?
Ask A QuestionQuestion:
My Rockstar Sparkle (PPB-5835) doesn’t have many metallic flakes in it. Should I apply a second coat? If second coat is needed should I partial cure or full cure in between?
01/28/21 02:37 am
Answer:
You can try to add an additional coating if your first application is on the flow-out or gel-out stage and then re-flow if you feel you have light coverage. If the application thickness looks correct but your metallic flake is light this could be because you are not charging enough flake as it feed through the gun. Try adjusting your KV level. Attached is a link to an article from our knowledge base discussing this very issue.
https://www.prismaticpowders.com/learn/153/what-kv-adjustment-can-do-for-your-metallic-application
If using a fluidizer be sure your fluidizing air pressures are not too high. Also, too long of a feed hose can cause the heavier materials to lose their path velocity and settle somewhere in the hose.
If you do decide to apply two separate coatings then yes, you would apply your first application, bring to flow-out or gel-out + 3 minutes. Then pull from the oven and allow to cool. Then apply your next coating and fully cure.
Knowledge Base FAQ
Congratulations, your account has been created.
Added To Cart
Some powders may require either a base coat or a top coat or have other
special instructions. Please read each product description carefully to
ensure you are ordering what you need.
Amount: $0 /ea
Quantity: 1